Multifunction process calibrator YHS-726 
 Multifunction process calibrator YHS-726 
 1. Large screen display. The upper part of the display screen measuring voltage and current measurement. Measurement of the lower part of the display screen or output voltage, current, platinum resistance, pressure, frequency, thermocouples and resistance measurement and output value. 
 2. Thermocouple (TC) input / output terminals and internal calibrator isothermal terminal block (with automatic reference junction temperature compensation), can function in the menu in the calibration. 
 3. Each output has a manual and automatic step out step, ramp, slow ramp, fast ramp output, you can set the 0% 
 25%, 100% of the value. 
 4. In the menu can be manually set: Instrumentation shutdown time, backlight off time, the screen contrast, cold junction compensation ON / OFF, 
 HART resistor ON / OFF and so on. 
 5. A calendar clock function in the menu in the calibration. 
 6. Can store eight measurements and output data, and can call the show. All settings and the function of the last operation in customs 
 Machine, it is automatically saved. 
 7. Large-capacity rechargeable battery, with a power adapter, the internal integrated charge-management functions. 
 8. New shape, a large screen dot-matrix graphic LCD, display Chinese characters function, human character key input, the operator 
 Easier. 
 9. 24V power output meter separately. 
 10. Instrument 0.025% basic accuracy. 
 Multifunction process calibrator YHS-726 measurement functions: 
 The display: 
 DC :0-30V 
 :0-24mA DC current 
 Circle Current :0-24mA (24V loop power supply comes) 
 The following screen: 
 DC voltage: 0 ~ 24V 
 DC millivolts: 0 ~ 90mV 
 DC current: 0 ~ 24mA 
 Resistance: 0 ~ 4000Ω 
 Frequency: 0.01 ~ 99.99Hz, 1.00 ~ 15.00kHz 
 Sensitivity: 200mV peak - peak 
 Pressure: with standard pressure modules, the accuracy of a module to decide, for differential pressure, gauge pressure, vacuum pressure, absolute pressure, dual pressure and high standard modules. 
 Measure the RTD of the Pt100 (385), Pt100 (3926), Pt100 (3916), Pt200 (385), Pt500 (385), Pt1000 (385) of the resistor, optional two wire / three-wire / four-wire mode measurement 
 Measure 8 (S, R, B, K, N, E, J, T,) thermocouple. 
 Multifunction process calibrator YHS-726 output: 
 DC voltage: 0 ~ 20V 
 DC millivolts: 0 ~ 90mV 
 DC current: 0 ~ 24mA 
 Resistance: 15 ~ 4000Ω 
 Frequency: 0.01 ~ 99.99Hz, 1.00 ~ 15.00kHz 
 Waveform: square wave, -0.1 V offset, amplitude adjustable (0-20V), between the air than the adjustable (0.3% -99.7%) 
 Simulation 8 (S, R, B, K, N, E, J, T,) thermocouple millivolt output signal, and with cold junction compensation 
 Simulation of RTD in the Pt100 (385), Pt100 (3926), Pt100 (3916), 
 Pt200 (385), Pt500 (385), Pt1000 (385) output